It’s that time of year again. Trees are starting to turn colors, leaves beginning to fall. The wind is picking up and I can already smell rain in the air. Soooooo….. I guess that means it’s time for the Fall Sale again.
This sale goes for all of my shops, both on and off of etsy. Prices are already reduced. See the links below for more details.
These are the sales for my newly refinished web-sites:
As you can probably tell already, I use a lot of crystal points in my jewelry designs. Whether they are drilled or undrilled, they can present a lot of design challenges. That’s one of the things I like most about them. So, when I found a great deal on a lot of tiny undrilled crystal points, well, challenge accepted.
When I said they were tiny, I meant it. These are about 3mm thick and 15-18mm long. At first, trying to wrap these securely without covering up the stone seemed like it would be more trouble that it was worth. But then I had one of those moments where it just clicked. I’ve come up with a couple of ways to wrap them, but this one, with it’s graceful curve that sweeps up the side, is one of my favorites.
So, when facebook reminded me that it’s been 3 years since my last video (oops) so I decided to do a quick one and show you how I wrap these little itty bitty crystals.
I still haven’t quite found a video set up I’m completely happy with, so please bear with me while I experiment. As always, if you have any suggestions for improving my videos, I’d love to hear them 🙂 .
This one is a very quick and simple wrap for crystal points that are very small. The one I’m using in the video is about 3.5mm thick and 18mm long. For a crystal point this size, I used 16 gauge (1.2mm) wire.
For this project, you’ll also need a needle file or a piece of 320 or 400 grit sandpaper (for smoothing wire ends), flush cutters, needle nose pliers, round nose pliers, bail making pliers (in a pinch you can use the widest part of your round nose pliers), a hammer and a bench block.
You can wrap larger crystals in a similar style, however, the larger the crystal point, the thicker the wire you will need.